Sabra Metals, based in the industrial heart of Amman, Jordan, is a trusted partner for precision-engineered steel products. We take pride in supplying high-quality SAE 1015 round bar and rod, consistently meeting the exacting standards of regional industries. Our commitment goes beyond just delivery; we focus on building lasting relationships by providing reliable material and local expertise. This low-carbon steel is a cornerstone for countless projects, valued for its excellent workability and dependable performance in both simple and complex manufacturing processes.
SAE 1015 is a low-carbon steel known for its excellent balance of formability and strength. Its composition is straightforward, primarily iron with a small, controlled amount of carbon, along with manganese and trace elements. This simple mix gives it impressive ductility, allowing it to be easily welded, machined, and formed into various shapes without becoming brittle. While it is not known for high strength, it offers reliable toughness and can be case-hardened to create a wear-resistant surface, making it a versatile and economical choice for many applications.
| application | Manufacturing |
| Material | Carbon Steel |
| Finish | Polished |
| Length | 6 Meter (m) |
| Grade | SAE 1015 |
|
Element |
Content (%) |
|---|---|
|
Iron, Fe |
99.13-99.57 |
|
Carbon, C |
0.13-0.18 |
|
Manganese, Mn |
0.30-0.60 |
|
Sulfur, S |
≤ 0.050 |
|
Phosphorous, P |
≤ 0.040 |
|
Properties |
Metric |
Imperial |
|---|---|---|
|
Tensile strength |
385 MPa |
55800 psi |
|
Yield strength |
325 MPa |
47100 psi |
|
Bulk modulus (typical for steel) |
140 GPa |
20300 ksi |
|
Shear modulus (typical for steel) |
80.0 GPa |
11600 ksi |
|
Elastic modulus |
190-210 GPa |
27557-30458 ksi |
|
Poisson’s ratio |
0.27-0.30 |
0.27-0.30 |
|
Elongation at break (In 50 mm) |
18.00% |
18.00% |
|
Reduction of area |
40.00% |
40.00% |
|
Hardness, Brinell |
111 |
111 |
|
Hardness, Knoop (converted from Brinell hardness) |
129 |
129 |
|
Hardness, Rockwell B (converted from Brinell hardness) |
64 |
64 |
|
Hardness, Vickers (converted from Brinell hardness) |
115 |
115 |
|
Machinability (based on AISI 1212 steel as 100 machinability. The machinability of Group I bar, rod, and wire products can be improved by cold drawing.) |
60 |
60 |
SAE 1015 round bars are typically sized by their diameter, ranging from small diameters like 1/4 inch to larger sizes up to 12 inches or more, depending on customer specifications.
SAE 1015 bars and rods are available in various forms including cold-finished, hot-rolled, polished, and precision ground. They are used for machining, manufacturing, and engineering applications, offering excellent strength and flexibility.
Yes, laser welding can be used for SAE 1015 bar. It offers precise control, low heat input, and minimal distortion, making it suitable for joining this low-carbon steel material.
The beauty of SAE 1015 round bar and rod lies in its incredible versatility across many industries. It’s often the ideal choice for creating bolts, pins, and studs where high strength isn’t the primary concern. Machinists favor it for producing gears, shafts, and spindles because it cuts so cleanly. You’ll also find it in a wide range of fixtures, light structural frames, and even automotive components like linkage parts. Its ability to be easily case-hardened also makes it suitable for parts requiring a tough, wear-resistant exterior.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Sabra Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Amman, Jordan
Copyright 2024 Sabra Metals. All rights reserved
